GoodWe Battery enclosure for GW5048-ESA
This is only the battery enclosure. You will also require the following:
- GW5048-ESA inverter
- SECU-A5.4L (1 for max 2.3kw output or 2 for full power)
Parameter
Number of battery units: Up to 4 x 19" Rack Mountable Battery Packs
Storage capacity: Up to 9.6kWh (4 x 2.4kWh Pylon Tech Batteries)
Battery voltage: 48V DC Nominal / 60V DC Maximum
Battery chemistry: Lithium-ion with BMS
Access type: Removable front Panels
Cable specification
Battery cable rating: 4 x 65A
Battery cable type: 8 AWG (8.36mm2)
Battery cable termination (battery enclosure): Surlok Amphenol Connector
Battery cable termination (inverter): Amphenol H4 (65A)
BMS cable type: Depends on Battery Type
BMS cable termination: Refer to Battery Enclosure Installation Manual
Ventilation specification
Ventilation type: Passive and Active Cooling
Ventilation control: Smart Temperature Control
Number of fans: 2
Fan power: 48V DC / 0.13A Per Fan
Fan activation temperature: Variable Depending on Charge/Discharge
Incoming ventilation aperture: 288cm2 with Washable Filter
Outgoing ventilation aperture: 288cm2 with Washable Filter
Passive airflow rate: 30cm3/min
Active airflow rate: 320cm3/min
General data
External dimension (W x H x D): 516mm x 205mm x 280mm (with Feet)
Mounting and weight – empty: 32kg Rear Fixing
Mounting and weight - with batteries: 130kg Typical
Ambient temperature range: Based on Battery Specification
Environmental protection rating: IP54 - Protected From Rain, Splashing and Spraying
Noise emissions: Less than 25dB
Warranty: 5 Years
Construction: Powder Coated Steel Chassis
Finish: Sealed, Powder Coated front Covers and Chassis
Supply: Ships Pre-assembled
Maintenance: Externally Serviceable Dust Filters