GIC GSM Remote controller, 100 - 280VAC, 180 - 540VAC
Subcribe to back in stock notification
- Load can be made ON / OFF using mobile phone from remote location either by making an IVRS call, missed call or sending SMS to the device.
- Device is suitable for Single Phase and Three Phase supply. Device is compatible with SASD, FASD & DOL starters and controllers.
- One Master and two other Master or Monitor numbers can be configured to control and monitor the Load operation.
- Load can be operated in Manual Mode, GSM Auto Mode, Timer Mode, Retentive Timer Mode or Multiple Daily Timer Mode Wire antenna for flexible positioning to get proper signal strength.
- User can get information of events like Load ON/OFF, Phase error, Error recovery, Power Fail, Power ON, Phase fail, Contactor pick up fault through SMS and call back from device
- Anti-theft feature Powered with Android App “M-Remote”
Parameters
Supply voltage: 180V AC to 500V AC (For Single Phase : Connect Live to R or Y & Neutral to B & COM terminal of Controller)
Frequency: 50/60 Hz
Power consumption (Max.): 10 VA
Initialisation time: 45 Sec
Contact ratings: Terminal 15 & 16 – NC ,Terminal 25 & 28 – NO, 5A @ 250V AC / 30V DC (Res)
LED indications
LED |
INDICATION |
DEVICE STATUS |
ON (Green) |
ON |
Master number configured. |
Blinking @ 500 m Sec |
GSM modem in factory default mode | |
CFG (Red) |
Blinking @ 500 m Sec |
GSM modem in configuration mode |
N/W (Green) |
Flash every 800 m sec |
Not registered with N/W |
Flash every 3 sec |
Registered with N/W | |
I1 & I2 (Yellow) |
Both ON |
Starter ON |
Both OFF |
Starter OFF | |
I1 Blinking @ 500 m Sec |
Phase fail | |
Both blinking |
Power fail indication till super capacitor back up | |
Tx/Rx (Green) |
Randomly Blinking |
Communication between CPU and Modem |
Flash every 400 m Sec |
SIM card not detected |
GSM modem: Quad band 850MHz,900MHz / 1800MHz,1900MHz
Operating temperature: 0° C to +60° C
Storage temperature: -20° C to +70° C
Humidity (Non Condensing): 95% (Rh)
Enclosure: Flame Retardant UL94-V0
Dimension (W x H x D): 72 X 90.5 X 65 mm
Weight (unpacked) approx.: 220 g
Mounting: DIN rail / Base
Degree of protection: IP 20 for Terminals, IP 30 for Enclosure