Stego Thermostat, 2-state regulator, NO, 20 - 80°C, 250VAC, 3A
Subcribe to back in stock notification
The mechanical thermostats KTO 011 (contact breaker) and KTS 011 (contact maker) are two state regulators used to control heaters, coolers, filter fans or signal devices. KTS 011 Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching signal devises when temperature limit has been exceeded. The contact closes when temperature is rising
- Large setting range
- Small size
- Simple to mount
- High switching performance
Parameters
Setting range: +20 to 80 °C
Switch temperature difference: 7 K (±4 K tolerance)
Sensor element: Thermostatic bimetal
Contact type: Snap-action contact
Service life: > 100,000 cycles
Max. operating voltage: AC 250 V (VDE), AC 120 V (UL)
Max. inrush current: AC 16 A for 10 sec.
Connection:
2-pole terminal, clamping torque 0.5 Nm max.: rigid wire 2.5 mm² (AWG 14), stranded wire1 1.5 mm² (AWG 16)
Mounting: Clip for 35 mm DIN rail, EN 60715)
Casing: Plastic according to UL94 V-0, light grey)
Dimensions: 60 x 33 x 43 mm)
Weight approx.: 40 g)
Fitting position: Variable)
Operating/Storage temperature: -45 to +80 °C )
Operating/Storage humidity max.: 90 % RH (non-condensing) )
Protection type: IP20