Stego Temperature and humidity sensor, 24VDC, 4 - 2mA
The compact Smart Sensor CSS 014 electronically records temperature and humidity and converts the measured data into a standardized analogue 4-20 mA or a digital IO-Link signal. The converted value signals can be utilized or further processed by a control or monitoring unit, e.g. a PLC control. The Smart Sensor is suitable for installation inside and outside the enclosure, even in harsh environmental conditions as can be found in the wind power industry: in shielded outdoor areas and exposed to vibrations.
- Analogue/digital interface
- Small size
- Easy clip and/or screw fixing
- High accuracy
- Quick connection (M12 plug-in connector)
- Large temperature and humidity range
- Various application areas (IEC 61010-1/DIN EN 61010-1)
Parameters
Interface: 4-20 mA
Operating voltage: DC 24 V (DC 12-30 V): 0 Ω < R < 160 Ω: (DC 12-30 V) 160 Ω < R < 500 Ω: (DC 20-30 V)
Power consumption max.: 1.8 W (typically 0.4 W)
Temperature measuring range: -40 to +60 °C
Load resistance (external): ≤ 500 Ω (4-20 mA only)
Connection: M12 round plug connector, IEC 61076-2-101, 4-pin, A-coded, shielded
Electrical protection: Reverse-polarity, short circuit, overvoltage protection
Mounting: Clip for 35 mm DIN rail, EN 60715 and screw fixing M5
Casing: Plastic according to UL94 V-0, light grey
Dimensions: 140 x 40 x 38 mm
Weight: Approx. 50 g
Fitting position: Vertical (connection on top)
Storage temperature: -40 to +70 °C
Operating/Storage humidity: Max. 90% RH (non-condensing)
Protection type1/Protection class: IP20 (sensor only IP57) / III (SELV)
Approvals: VDE, UL File No. E500143 (acc. to IEC 61010-1/DIN EN 61010-1), EAC