GIC Pid Temperature Controller Series Pr 69


  • Description
  • Specifications
  • Other parts
  • Documents


Temperature Controllers, as the name suggests, are used to control temperature. GIC manufactures ON/OFF Temperature Controllers that follow a very simple principle. To elaborate on the principal, after a set point is fixed for heating control, the output is switched on when the temperature is below the set point and switched off when it is above the set point to keep the temperature at a desired level.


  • Universal Input
  • Flush Mounting Version 48x48 mm¬†with Dual Line Digital Seven Segment Display
  • Configurable Output combination
  • Configurable: Band, Deviation,¬†Sensor break & Loop break alarms
  • Single/Dual acting PID controllers with 4 Control modes
  • Auto-tuning PID with provision for Soft-Start
  • 6 Segment (3 Ramp & 3 Soak)¬†with Power Failure resumption modes
  • RS 485 Communication
  • IP 20 (for Terminals & Enclosure), IP 40 (for Front Panel only)
  • Timer functionality with settable time¬†from 1min to 9999 min


Supply voltage: 110 - 240V AC/DC

Supply variation: -20% to +10%

Frequency: 50/60 Hz

Control action:
ON/OFF (Symmetric/ Asymmetric), PID (Single/ Dual Acting) (Neutral zone only for dual acting)

Tuning method: Auto Tuning / Manual Tuning

Temperature sensors / inputs: Thermocouple: J, K, E, S, B, R; RTD: PT100 - 3 wire compensation; Analogue signal DC: (0-50 mV, 0-60 mV,12-60 mV)

Measurement range

  • Sensor J: 0 to 700°C, Sensor K: 0 to 1300°C,
  • Sensor E: 0 to 600°C, Sensor R: 0 to 1750°C, 
  • Sensor S: 0 to 1750°C Sensor B: 250 to 1820°C, 

Sensor PT100 3 wire: - 200 to 700°C

Measurement accuracy: +/-0.5% of full scale of PT100, +/-1% of full scale for TC & mV signals

Resolution: 0.1°C for RTD, J, E & 1° for S, B, K, R & 0.001°C for mV signals

Configurable set points: 4

Display: Dual row 7 segment display with LED indications, 4-digit process value, 4 digit set value



1: Relay: SPST 5A @ 240 VAC / 28 VDC

2: Relay: SPST 5A @ 240 VAC / 24 VDC

3: SSR: 12 VDC, 24 mA, Short Circuit Protection


Alarm types: Absolute (High/Low/Band), Deviation (High/Low/Band), Sensor Break, Loop Break

Soft start feature: Yes

Ramp soak feature: 3 Ramp & 3 Soak

RS 485 Communication: RS 485 Communication

Transmission speed & type: 300 to 19200 BPS (Half Duplex)

Transmission protocol: Modbus RTU

Operating temperature: 0°C to +50°C

Storage temperature: -20°C to +60°C       

Humidity (Non Condensing): 80% (Rh)

Enclosure: Flame Retardant UL94V0

Dimensions (W x H x D): 48 x 48 x 107.4mm

Weight (unpacked): 160 g

Mounting: Flush

Degree of Protection: IP 20 Terminal & Enclosure, IP 40 (For Front Panel only)

Other parts


rubicon group

Net Orders Checkout

Item Price Qty Total
Subtotal R 0.00

Shipping Address

Shipping Methods