GIC Mini PLC Pl - 100


  • Description
  • Specifications
  • Other parts
  • Documents


Programmable Logic controller is used to monitor inputs, and depending upon their states, it makes decisions based on its program or logic so as to control (turn ON/OFF) its outputs to automate a machine or a process.

Programmable Logic Controller can control a wide variety of devices to support User’s automation needs. The Programmable Logic Controller monitors inputs and changes outputs as controlled by the user program, which can include Boolean logic, counting, timing, complex math operations and communications with other intelligent devices. The compact design, flexible configuration and powerful instruction sets are combined to make the Programmable Logic Controller a perfect solution for controlling a wide variety of applications.

Now you can seamlessly implement automation in your electromechanical processes with GIC’s Programmable Logic controller. It is a real-time system designed for multiple input and output arrangements and has applications in both, Industrial and Commercial sectors.

  • Supports up to 112 IOs
  • Relay Base & Transistor Low Side Base modules
  • Stacking using FRC cable up to maximum 6 Expansion Modules
  • Isolated Digital Inputs with sourcing & sinking capability
  • Isolated Digital Transistorized Outputs (Low Side and High side driver)
  • High Speed Inputs - Single / Quadrature (1x/2x/4x)
  • High Speed Outputs (PTO / PWM / S-Profile)
  • Analogue Voltage/Current Inputs and Outputs of 0-10 V / 4-20 mA
  • PC Software for programming, online & offline simulation
  • Standard RS232/RS485 port with RJ11 for HMI/SCADA Interface
  • Modbus RTU support
  • 128 Weekly, Monthly & Yearly Time Switches each
  • Multiple Timers, Counters including retentive counters, Hour meters & many more function blocks




Supply voltage: 24V DC

Supply tolerance: -20% to +10%

Internal current consumption: 65mA @ 24V DC

Inrush current: 2.5A @ 24V DC

Battery backup (In Event of Power failure): 5 years 

Separate power supply for output: Not required


No. of inputs: 8

Grouping: (4+1 Common)

Type of inputs: Sinking / Sourcing

Input voltage range: 0 - 26.4V DC

Level (Logic 0): Max. 7V DC

Level (Logic 1): Min. 16V DC

Max. input current: 1.2 mA per input

Hardware delay: 5 msec

Digital filter time (Sampling time): 28 msec

Min. pulse width: Hardware Delay + Digital Filter Time OR System Loop Time, whichever is higher.

Max. I/P frequency: 10 Hz (for worst case condition)


No. of outputs: 8

Grouping: (4+1 Common)

Output hardware: Relay (NO)

Input voltage range: 0 - 26.4V DC

Rated load: 5 A (Res.) @ 230V AC / 30V DC

Level (Logic 1): Min. 16V DC

Max. input current: 1.2 mA per input

Max load per common:10A

Max operations: 1x10

Protection: External Fuse


Between output supply: 2KV

Between input; Supply: 2KV


PC port (USB): USB Port (Type B) for PC Communication

Isolation for USB Port: 2KV between communication lines and internal circuit

HMI Port (RS-232 / RS-485): RJ11 Port for HMI (or any MODBUS Device)

Communication parameters: Software selectable for HMI Port

HMI port comm. protocol: MODBUS Slave / MODBUS Master


Programming language: Ladder

Scan time: 50 mS max.

User Program memory: 32 k 

User Data memory: 1 k

Maximum no. of I/O s: 100

Maximum no. of extension modules: 6


Input: Yes (Green LED)

Output: Yes (Red LED)

RUN: Yes (Green LED)

STOP: Yes (Red LED)

ERROR: Yes (Red LED Blinking)

Operating temperature: 0ºC to 55ºC

Storage temperature: -20ºC to 70ºC

Relative humidity: 20-90% RH (Without condensation)

Environmental air: No excessive dust or corrosive gas allowed

Dimension (W x H x D): 72 x 90 x 58mm

Weight (unpacked) Approx.: 220g

Mounting: DIN Rail (35 mm)

Enclosure material: UL 94 V0

Degree of protection: IP 20 for Terminals, IP 40 for Enclosure

Certification / Standard


  • ESD IEC 61000-4-2
  • Radiated Susceptibility IEC 61000-4-3
  • Electrical Fast Transients IEC 61000-4-4
  • Surges IEC 61000-4-5
  • Conducted Susceptibility IEC 61000-4-6
  • Radiated Emission CISPR 14-1
  • Conducted Emission CISPR 11
  • Radiated Emission CISPR 11

Safety Compliance

  • Test Voltage between I/P and O/P UL 508
  • Impulse Voltage between I/P and O/P IEC 60947-5-1
  • Single Fault IEC 61010-1
  • Insulation Resistance UL 508
  • Leakage Current UL 508

Environmental Compliance

  • Cold Heat IEC 60068-2-1
  • Dry Heat IEC 60068-2-2
  • Vibration IEC 60068-2-6

Other parts


rubicon group

Net Orders Checkout

Item Price Qty Total
Subtotal R 0.00

Shipping Address

Shipping Methods