Euchner SN06D12-502-M Limit switch, 1NC + 1NO, 12mm

2 sold in last 8 hours
Euchner
086581
2 In stock
Safety Automation
EUCHNER precision multiple limit switches are used for controlling and positioning in all areas of mechanical and systems engineering and for solving automation tasks. A range of housing versions, including DIN versions, are available to suit the full spectrum of application fields. A high standard of quality is always guaranteed...

EUCHNER precision multiple limit switches are used for controlling and positioning in all areas of mechanical and systems engineering and for solving automation tasks. A range of housing versions, including DIN versions, are available to suit the full spectrum of application fields. A high standard of quality is always guaranteed in every installation position by the degree of protection IP 67.

Precision multiple limit switches possess several switching elements arranged in a row. The spacing between the individual switching positions of 12 mm and 16 mm is standardized in accordance with DIN 43697. The range is completed with a particularly compact, space-saving version with a spacing of 8 mm. The switching elements are actuated by means of plungers. This action is achieved with trip dogs in accordance with DIN 69 639, which are mounted with an interference fit in trip rails according to DIN 69 638.

Snap-action switching elements are predominantly used in mechanical multiple limit switches. On snap-action switching elements, the change from the completely closed state to the completely open state is made at a defined point (operating point). As a result the operating point is at a defined position, unlike on slow-action contact elements. Snap-action switching elements typically have a switching hysteresis

Parameter

Design: SN06D12-502-M Limit Switch, Upright

Housing material : Housing Die-cast aluminum, anodized

Number of NC contacts : 6

Number of NO contacts : 6


Mechanical data

Mechanical life: 30 x 106

Contact material: Silver alloy, gold flashed

Switching principle: Snap-action switching contact

Plunger spacing: 12 mm

Installation orientation: Any

Connection: 2 xM20 x 1.5


Electrical data

Thermal rated current: 8 A

Short circuit protection: 8A gG

Rated insulation voltage: 250 V

Rated impulse withstand voltage : 2,5 kV

Switching current : Min. at DC 12Vmin.10 mA

Connection cross-section: 0,34 ... 1,5 mm²


Ambient conditions

Ambient temperature: -5 °C to 80 °C

Degree of protection: IP67

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Euchner SN06D12-502-M Limit switch, 1NC + 1NO, 12mm
You have successfully subscribed!
This email has been registered