GoodWe Hybrid inverter, Li-Ion battery, 3-phase, 10kW

Goodwe
GW10K-ET
5 In stock
ENERGY : Solar PV Inverters
ET series is a three-phase high voltage The Goodwe ET series is a three-phase high voltage energy storage inverter that enables enhanced energy independence and maximizes self-consumption through export limit feature and time of use shifts for reduced electricity bills.Covering a power range of 5kW, 8kW and 10kW, the ET...

ET series is a three-phase high voltage

The Goodwe ET series is a three-phase high voltage energy storage inverter that enables enhanced energy independence and maximizes self-consumption through export limit feature and time of use shifts for reduced electricity bills.

Covering a power range of 5kW, 8kW and 10kW, the ET series allows up to 10% overloading to maximum power output and features Uninterruptible Power Supply (UPS) to inductive loads such as air conditioners or refrigerators, with an automatic switchover time of less than 10 milliseconds, providing grid-tied savings when the grid is up and off-grid independence and security when the grid is down or compromised.

Primary Functions:
Increasing Self-Consumption: During the day, the electricity from the PV array is used to optimize self-consumption. The excess is used to recharge the batteries and can be released to the loads at night. The highest proportion of self use is up to 95%.

  • Peak Shaving: By setting the charging and discharging time, the battery can be charged using the lower electrical rate and discharged to loads when there is a high electrical rate.
  • Power Supply for Important Loads: Connected to the backup side of the inverter, loads such as refrigerators, routers, lamps, computers and other small appliances can be powered. When grid fails the system automatically switches to back-up mode within milliseconds.

The product conforms to the following compliance standards:

Rubicon- EPR Compliant | Rubicon Partner Portal




Parameters

Weight: 26 kg

Dimensions: 520 × 420 × 180 mm

Type: Hybrid

Phase: Three Phase

Continuous power (On grid): 10 000VA

Continuous power (Backup): 10 000VA

DC voltage: 180 - 600V

No. of MPPTs: 2

Max. PV input current: 2x 12.5A

Max. input voltage: 1000V

Max. charging current: 25A

Warranty: 5 Years, can be extended to 10 Years

Note: The battery input has MC4 style connectors, for up to 6mm² cables. However, most of the popular HV batteries (eg: Synapse HV or Pylontech) use Amphenol battery connectors with a 25mm² cable. Since MC4 style connectors cannot accommodate very large cross section cables, a suitable cable size adapting device is required, such as a junction box etc. 

GoodWe Hybrid inverter, Li-Ion battery, 3-phase, 10kW
You have successfully subscribed!
This email has been registered