GoodWe All-in-1 storage solution, 1-phase, excl batt, 4.6kW

2 sold in last 8 hours
Goodwe
GW5048-ESA
3 In stock
Solar PV - Inverters
Please note: You will also require the following components: SECU-A5.4L and BCL9600 Every GW5048-ESA system requires 2x batteries to run at full power. These batteries are not compatible with other inverters at this time GoodWe ESA Series is an all-in-one solar and storage solution which integrates the inverter, battery charger,...

Please note:

  • You will also require the following components: SECU-A5.4L and BCL9600
  • Every GW5048-ESA system requires 2x batteries to run at full power.
  • These batteries are not compatible with other inverters at this time

GoodWe ESA Series is an all-in-one solar and storage solution which integrates the inverter, battery charger, UPS and battery enclosure into a pre-wired modular system for easier and faster installation. The compact, elegantly designed and robust unit is IP65 rated so it can be mounted either inside or outside, withstanding all weather conditions.

  • Pre-Installed Devices: Built-in DC switch, AC breaker (On-Grid/Backup), battery breaker, switch board, earth terminal and communication unit.
  • Pre-Wired Design: The smart meter, the battery and the AC breaker are pre-wired and pre-connected at the factory and at the moment the set reaches the end users, it is ready to be deployed and installed.
  • Preset Cable Slot: As part of the systems design, there is a cable slot, where external PV and CT cables to the grid or the loads can be placed.
  • In addition, the ESA system is also equipped with an AC load bypass switch, used for switching the load supply from the backup to the grid; the bypass switch also performs the rapid shutdown protection through the connection of an additional external breaker with a switch board.

Input data (DC)

Max. DC power: 6.5 kW

Max. DC voltage:580 V

Nominal DC voltage:360 V

Min. DC voltage to start feed in:150 V

Max. DC current: 22 A

MPP(T) voltage range: 125~550 V

No of MPP trackers: 2

DC inputs:1

 

Output data (AC)

Nominal AC power: 4.6 kW

Output AC voltage range: 225.4~234.6 V

Nominal AC voltage: 230 V

Max. AC current: 22.8 A

Nominal AC current: 20 A

Frequency range: 49.9-60.1 Hz

Frequency: 50, 60 Hz

Power factor (cosθ): 1

Distortion (THD): < 3 %

Max. efficiency: 97.6 %

Euro efficiency: 97 %

 

General data

Dimensions (H/W/D): 832 x 516 x 290 mm

Weight: 44 kg

Noise level: < 25 dB(A)

Operating temperature: -25 ~ +60 

Transformer: High Frequency-Transformer

Protection class: IP65

Humidity: 0-95 %

Cooling: Natural

Max. altitude: 3000 m

Interface: RS 485, WLAN

Display: LED

 

Protection features

Protection features: Short Circuit Protection, Overvoltage Protection, Overcurrent Protection, Residual Current Device (RCD)

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
GoodWe All-in-1 storage solution, 1-phase, excl batt, 4.6kW
You have successfully subscribed!
This email has been registered